Solution

Home >> Solution >> Andesite processing

Andesite processing

Andesite introduction:

Andesite is a neutral calc-alkaline eruptive rock. Its composition is equivalent to diorite. The Andesite sand production line has the characteristics of reliable performance, reasonable design, convenient operation and high work efficiency.


Application fields: 

Applications in industries such as hydropower, highways, and urban construction


Equipment configuration: 

jaw crusher, cone crusher, sand making machine, vibrating feeder, vibrating screen, iron remover and belt conveyor


Andesite processing:

The material is sent to the jaw crusher through the feeder to be coarsely crushed, and then sent to the cone crusher for medium or fine crushing.The crushed product of the cone crusher enters the vibrating screen and is screened.The return cone crusher larger than 40mm breaks and breaks again, forming a closed loop,less than 40mm into the vertical impact crusher crush.The material from the vertical impact crusher enters the vibrating screen,more than 20mm returning vertical impact crusher to break, forming a closed loop.Material less than 20mm is transported to the finished product pile via a belt conveyor,according to the cleanliness of the raw materials, it is considered to send the materials of 0-5mm to the sand washing machine for cleaning.


Andesite processing technology:

The Andesite crushing production line carefully developed by Dewo technicians has the characteristics of reasonable configuration, high degree of automation, low operating cost, high breaking rate, energy saving and environmental protection, large output and easy maintenance. The sand and gravel aggregate produced meets the national building sand standard. The product has uniform particle size, good grain shape and reasonable gradation.The equipment configuration of the crushing production line is mainly determined by the customer's specifications for the sand and the output and the use of the sand. We provide the solution and technical support, configure the process according to the customer's production site, and strive to make a reasonable and economical production line for the customer.

 A8-改.jpg

Remarks:The production line is mainly based on the actual material size and the customer's requirements for product granularity. According to different production site conditions, Dewo engineers can provide customers with process planning and technical support, and we can also design non-standard according to the actual installation conditions of customers and supporting components, etc., we strive to achieve a reasonable and economical production line for customers.

 


Thank you for your interest in Dewo. Please feel free to contact us for related products, production lines, etc. We will reply with you as soon as possible !

Contact us